Espardino(tm)

Espardino is a new concept of ARM board, designed with prototyping, development, and production in mind!

Easy to work with.. It comes with a preinstalled USB bootloader that will let you program the board without any kind of special software in your PC. A huge amount of libraries ready to use in your projects.

High memory and capacity: 64kB/512kB flash (max) and 16/32kB of RAM, 32bit ARM7 processor, 60 MIPS.

• Integrated USB bootloader (8kB) that will let you work without any kind of programmer or software (Push button to start the on board bootloader.)
• microSD connector ready to use, connected to SPI0
• 12 Mhz on board cristal (60MIPS/32bits processor)
• Integrated 5V to 3.3V regulator up to 800mA (the micro is 5V tolerant)
• 32.768KHz Real Time Clock crystal.
• 5 pin USB micro-b connector.
• 3 leds for easy monitoring.
• Reset circuit
• Easy to start with GCC4 development tools based on GNU Toolchain and Programmer’s notepad.
• Easy to use Libraries for: microSD FAT16/32 file access, Virtual COM port, PWM outputs, A/D converters, DAC, PWM inputs, USART, I2C, SPI.
• 2 x 0.254mm step double headers for easy prototyping.
• Size: 53 x 34.5 mm.

Espardino micro2142 (this part has gone to early EOL, please check for discounts (as low as 15€)!)

Espardino micro2148¹⁾

Web Installer, with remote updater

For more information about Espardino's SDK you can go here: sdk/starting